Mosfet NanoAAB Active Brake Gate

The MOSFET with NanoAAB active brake is the most effective because it has a 3rd generation active brake from the Gate manufacturer. Our technology allowed us to create the smallest and most reliable MOSFET on the market. This mosfet thanks to its coating is resistant to atmospheric conditions

Measures Mosfet Nano AAB: 43 mm x 20 mm x 10 mm

Review Installation and impressions, minute 14 and 15 difference of cadence between carrying it installed and not carrying it: https://youtu.be/AnCWgbCAJmc

2nd part: https://youtu.be/xPQKaNso2E8

NANOABB INSTALLATION GUIDE IN PDF
Characteristics of the NanoAAB Mosfet:

- MOSFET: Do you want to achieve a higher rate of fire and that the trigger responds faster? Are you planning to increase the power of your rifle? In that case, you need a MOSFET. It directs the battery's energy directly to the motor and prevents it from passing through the mechanical contacts of the trigger. As a result, a higher rate of fire and a faster trigger response is achieved. In addition, contacts are prevented from fusing.
- ACTIVE BRAKE: Are you interesting in realism? Would you like to extend the life of the gearbox? Does your rifle have such a high firing rate that it can not fire a single shot? The active brake solves these problems. In SEMI mode, the brake does not allow the piston to be compressed after a trip. The piston stops in front position, which eliminates unnecessary stresses and increases the life of the gearbox and its parts. This is very important, especially with power increases in automatic electric weapons. After releasing the trigger, the rifle stops firing immediately. In this way, you will gain realism and you will not lose your precious ammunition.

- ELECTRONIC FUSE: The new MOSFETs will never disappoint you on the battlefield. They come fully protected against overheating and short-circuiting the electrical system. In case the rifle gets stuck, they protect the motor and the battery so that they do not get damaged.

- DIGITAL INTERFACE: It is completely compatible with microswitches. It is completely resistant to contact rebound. You will achieve a higher rate of fire, a faster trigger response and your MOSFET heats up less

- 3rd GENERATION MOSFET: The use of the most modern transistors and microcontrollers allowed us to create the smallest and most reliable MOSFET on the market.

The box contains:
- MOSFET NanoAAB
- T-Dean connectors
- One signal cable for trigger contacts
- Two signal cable for trigger contacts