Mosfet PICO AAB Active Gate Brake

The PicoAAB Mosfet is the smallest active braking mosfet on the market. Pico AAB third generation is capable of working with Li-Po batteries up to 14.8 V, it can be installed in any AEG airsoft weapon thanks to its small size

PicoAAB Mosfet measurements: 33 mm x 10 mm x 5 mm

Review Installation and impressions, minute 14 and 15 cadence difference between having it installed and not having it:
https://youtu.be/AnCWgbCAJmc

2nd part
https://youtu.be/xPQKaNso2E8

Installation guide:
http://gatee.eu/images/gate/instrukcje/picoAAB-es.pdf

Gate's PicoAAB active brake mosfet has the following

Characteristics:

- MOSFET: Do you want to achieve a higher rate of fire and a faster trigger response? Are you planning to increase the power of your rifle? In that case, you need a MOSFET. Directs battery power directly to the motor and prevents it from passing through the mechanical contacts of the trigger. As a result, a higher rate of fire and faster trigger response are achieved. In addition, contacts are prevented from melting.
- Active brake: Do you care about realism? Would you like to extend the life of your gearbox? Does your rifle have such a high rate of fire that you can't fire a single shot? Active braking solves these problems. In SEMI mode, the brake does not allow the piston to compress after a shot. The piston stops in the forward position, eliminating unnecessary stresses and increasing the life of the gearbox and its parts. This is very important, especially with power increases in electric automatic weapons. After releasing the trigger, the rifle immediately stops firing. This way, you will gain realism and also not lose your precious ammunition.
- Electronic Fuse: New MOSFETs will never let you down on the battlefield. They come fully protected against overheating and short circuits of the electrical system. In case the rifle jams, they protect the motor and battery from being damaged.
- Digital interface: It is fully compatible with microswitches. It is completely resistant to contact bounce. You achieve a higher rate of fire, faster trigger response, and your MOSFET heats up less.
- 3rd generation MOSFET: The use of the most modern transistors and microcontrollers allowed us to create the smallest and most reliable MOSFET on the market.

The box contains:

PicoAAB mosfet with active brake
Flat connectors
Bidirectional signal cable for contacts